We purchased a new software - E monitor odyssey 3.30.00 build 4.
with 2 channel data collector Enpac 2500 balancing kit and phase measurement.
please:
How can help how can i introduce frequency items of a machine to the software (components of a machine that generates one or more frequency items (fans, belts , bearings,....etc))- Frequency setup.


thank you

The software is basic type

Version is now called Workstation, not Basic. You require upgrade to Factory version (comes as 2 user version but you will need multi user database!) to include Frequency items. There is a Frequency Item pane to input required details.

In workstation on the spectrum, press 'B' on keyboard to display bearing frequencies.

Regards

Wayne

HI
thank you Mr Wayne

2-Is taht means I CAN INTROdOUCE THE GEAR , FAN BLADES , VANES, BELTS, FREQUENCY TO THE SOFT WARE.(can you aske how can i introduce this fequencies?)

2- How much you think we need to upgrade to factory virsion?

thank you

Regards

hi
is this system used 4 vibration analysis without frequency items, how u will know the bearings frequencies

Ahmed,

Using the 'bearing cursor' (B) gives you access to the bearing database. You can also select PLOTS>OPTIONS>CURSORS. There is a bearing estimator also.

With bearing cursor, one different coloured line is for the 1x (Using arrow keys to align 1x) , other cursor lines align with bearing frequencies. Use HELP to identify which frequencies are indicated (FTF, BSF etc).

With Factory, you get an additional PANE call FREQUENCY SETUP. You also have full access to SPECTRAL ALARMS based around these frequencies.

If you want to use this function for automated reporting using DETAILED SPECTRUM reports. Then you need to upgrade. You can then also use software analysis functions. I suggest you contact your local agent.

Wayne

EmonFreq.doc (83 Kb, 17 downloads) Demo setup

Hello

Thank you very much Mr wayne A about your help
best regards