What is required to download and display data collected using the Special Cascade downloadable program for the Consultant?

Thanks,

Danny

Danny,

I haven't used this program for many years. According to the 2120 manual, you can select and save the spectra to a Route measurement point and then upload to MasterTrend.

Another option might be to use the VirPrint program to print an image file to the PC and then print it or paste into MS Word.

Walt

Dave,

You might need a program called "Analyze Jobs". I would check with CSI directly.

Dan

Walt,

There are a few tricks, but I got it to download as off route data. I can handle it from there.

Thanks,

Danny

Danny you could also use an existing route point for saving the cascade data on the analyzer.They will appear as multiple single spectrums in mastertrend. while saving the cascade data normally i save only the relevant spectrums for which there is an option otherwise i end up with a lot of unneccesary spectrums which is difficult to handle

Viki,

I think that in my case, the cascade data didn't get saved because I didn't have a route on the external card when I collected the data. When I realized that I didn't have an active route, I copied the route that was on the internal card and was able to save the cascade plot, but as off-route data. Now I will have create a new machine and assign the cascade plots to a measurement point in that machine and I should have normal Plotdata functions.

Thanks,

Danny