Hi,

What could be the possible defects if high peak on 12X of running speed?

Details
Motor type AEG, AMFV132MYA60474
Speed 25.7hz amps 5.4
bearings DE 6308 NDE 6208
Drives roller by tooth belt (no of teeth unknown)
Only have FFT, TWF not available.

Thank you

This message has been edited. Last edited by: vellangana,

L3_dryer_outlet_mtr.doc (265 KB, 40 downloads)

Remove the belt and run it without to eliminate possible issues with it.

Check the number of teeth on the belt pulleys, this peak may correspond to the number of teeth on one of the pulleys X running speed.

Hi,
Alex and Randle, Thank for your advice and i have found out its actually 10X of belt speed.