Does anyone have the bearing information for a Dodge Double Interlock #023520 and #023526?

Thanks,
Ronnie

023520 Dodge E series 2 7/16 tapered roller
IR = 9.251011
OR = 11.748989
BS = 4.011931 (x2)
FTF = 0440524

023526 Dodge E series 3 3/16 tapered roller
IR = 11.811316
OR = 14.188684
SB = 5.152213 (x2)
FTF = 0.454281

John J

Thanks John.

John,
Is it common for these type bearings to have a higher outter race frequency than the inner race? I am not use to seeing that.

Ronnie,

You are right. I had them reversed.

John J

does anyone know where i could get a complete listing of dodge bearing fault freq's or point me in the right direction where to look? quite a few of these are finding there way on to our site and i have nil info on them, they dont appear to be in RBMware database

Here's a link to most of them. Download the pdf.

Dave

http://www.dodge-pt.com/pdf/catalog/bearings/engineering/eng_eng.pdf

Thanks for the link Dave.

Ronnie

Thanks Dave,

I've checked it out, only problem is its all inch stuff, which in Australia isnt really relevant, I've tried contacting Dodge but response times are much quicker on this forum, dont suppose you'd know where i can get metric equivalent?

thanks
Jonesy.

Jonesy,

The metric equivalents for sizing can be found in this catalog.

http://www.dodge-pt.com/literature/catalogs/bearings_catalog.html

Hunt around, you'll find what you're looking for I think

Dave

Dave,
are you suggesting i convert the imperial bore size to mm's and use the freq's from the imperial bearing? I searched all through the link you sent, but only came up with imperial stuff

I'm looking for frequencies for a Dodge 2-7/16 S1 NO. 067159. I'm not sure if the bearing number is in the right format. Can someone help with this?

Also, I tried the link above to get the pdf, but it no longer works. Does someone have a current link to a pdf?

Thanks.

Michael Titone

http://www.baldor.com/support/literature_load.asp?LitNumber=CA3001

Walt

Hi--Jacking...........

I am looking for bearing conversion or frequencies for the following:

GE parts list of bearing on the nameplate

629A22661 -- upper
&
5903493P16 --- lower

Any info would be helpful!

I got what I needed. Thanks.

THMotorMan

For the 629A226 G1 is a one bearing 7226. The lower it is a 6215 bearing.

Thanks Sean!

hello
also I want asked abuot DODGE BEG. I have beg. type neam BORE TYPE BEARINGS OR PILOTED FLANG BEARING
NO.Timken cone 390758
Drive Collar screw NO. 400094
Drive Coller NO. 060023
AND Various Shaft Sizes 1- 15/16
any one can help or give equivalents for sizing
the link from Dave and Walt not working

I clicked on my link above and it brought up the Dodge bearing catelog in PDF format.

Walt