hello

how can help in how can i introduce the phase measurement to the database and meaure it bye using emonitor odyssy sodtwate -workstation and enpac 2500 data collector
thank you

Easy,

Set up Mag reading in Measurement pane. Select collection specification Mag/Phase.

Regards

And hope you don't get the message "1 point not loaded due to unsupported function".
That's the message you'll get on the newest op system. Hope they correct it before it goes to distribution.

Dave

Hello DEAR FRIENDS Wyane A and PRS_Dave

Thank you very much about your help i did not get the message (not loaded due to unsupport)
and i will try to find Mag reading set up

Tank you and best regards

If you haven't found the mag reading setup yet, then you don't know whether or not you will get the "unsupported function" message. It will only appear when you try to load the EP.

Dave

Unsupported Function occurs when one parameter in the measurement definition pane is not supported by the data collector.

Ensure filter is set to 1st Order.

WA

Ah Wayne,

I do believe you are right. I forgot about that filter having to be at first order.
Thanks for reminding me. I will try that myself again

Dave

Yes Wayne,

I believe I now remember that filter having to be at first order. That is probably what I have wrong.
Thanks,

Dave

HELLO
Thank you Mrs Wayne and Dave about your help i tried today the measurement pane and i couldent find what you said, i will try to set the filter at first order, but where in the in data histry window or whrere?

thank ypu agin and iam sory

It is located in the collection specification for that magnitude point.The easiest thing to do is create a collection spec and call it Phase. Then when you want to include phase for a particular machine or point, you can use that collection spec.
If you don't understand what I'm talking about, you need to get some one on one training on Odyssey.

Dave

Dear Mr PRS_Dave
THANK YOU VERY MUCH REALY ABOUT YOUR HELPING AND INTERSTING IN MY QUESTIONS.
I understand what you asked, i will do a collection for phase.
But i have a question :
There are no phase units (degrees, radians,or degree 360) in the data type in the data history window while i build my database how can i activate these units?.


thank you
best regards

The column will appear when you actually collect the data. When you click on the magnitude reading that includes the phase collection spec, the value will appear in the data history window under the "Phase" column.

Dave

This message has been edited. Last edited by: RRS_Dave,

Ahmed,

Phase column is always available when using Magnitude data history pane.

To change phase units go to SETUP>OPTIONS>GENERAL database, to configure.

WayneA

Ody1.doc (88 Kb, 17 downloads) Phase

Dear sirs
thank you very much
I see the phase value while i taking the measurement in the data collector, but the phase value not appear in the phase column
in the data history window

thanks

You stored the reading in the Enpac didn't you?

Dave

Hi

How are you
Can i know from where are you Mr PRS_Dave and Mr wayne A

thank you very much about ur helps you are realy experts
thank you

I work for major pump manufacturer Dubai/Abu Dhabi/Khober.

20 Yrs CBM.

Regards

Wayne A

Eng. Ahmed - I assume you are based ME region?

We (my company)are not a product vendor, just a service company.

Several Seminars are coming to Dubai/Abu Dhabi 2007. I suggest you use search (engine) to meet and communicate with experts in CBM field for the ME region. Maintenance Management and Rotate are annual conferences. All vendors are welcome? Look forward to seeing you all. Many other conferences are available through different (seminar provider)companies and vendor in the ME region.

mm2007.pdf (325 Kb, 12 downloads) Seminar Dubai 2007

hello

thank you Mr wayne A, the conferences are very helpful and give many benifits but its very costly to come and share in my account

thank you

[QUOTE]Originally posted by Wayne A:
Unsupported Function occurs when one parameter in the measurement definition pane is not supported by the data collector.

Ensure filter is set to 1st Order.

hello Mr wayne
can you explain why we use 1St order filter when we want to measure phase?

thank you