Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Russell Dees
Posted
Hey All, I'm looking for someone to do in-house pump traing for our rebuild shop. Our rebuilder retired without substantial time to retrain. If you've used anyone or now of any let me know please.(we use Bingham, Alstrom, Goulds, Warren, Worthington pumps, looking for pulp mill knowlege)
 
Posts: 3 | Registered: 21 July 2005Reply With QuoteEdit or Delete MessageReport This Post
MotorDoc
Posted Hide Post
About where are you located?

Howard


Howard W Penrose, Ph.D., CMRP
President, SUCCESS by DESIGN Reliability Services
Author: "Physical Asset Management for the Executive (Caution: Don't Read this on an Airplane)" and;
"Electrical Motor Diagnostics: 2nd Edition"
 
Posts: 846 | Location: Connecticut, Michigan and Illinois | Registered: 12 April 2005Reply With QuoteEdit or Delete MessageReport This Post
Russell Dees
Posted Hide Post
We are Evergreen Pulp Mill, located in Samoa California. (the north west corner)
#1 TCF Drive
Samoa, California 95564
 
Posts: 3 | Registered: 21 July 2005Reply With QuoteEdit or Delete MessageReport This Post
Jim C.
Posted Hide Post
Russell,

You may want to "lean" on one or all of your pump or parts suppliers. I have had great success with mechanical seal suppliers in the past.

You can often leverage a contract to supply such things as training (for operators as well as mechanics), Root cause Analysis, etc.

Just some thoughts ...

Jim C.
 
Posts: 6 | Location: Augusta, GA | Registered: 17 July 2005Reply With QuoteEdit or Delete MessageReport This Post
MotorDoc
Posted Hide Post
Jim C. has a good point.

I do not know of any pump trainers in your area. However, the top ones, that I am aware of, are members of the Hydraulic Institute. Their website is http://www.pumps.org.

If I can provide additional assistance, please feel free to email me.

Howard
howard@motordiagnostics.com


Howard W Penrose, Ph.D., CMRP
President, SUCCESS by DESIGN Reliability Services
Author: "Physical Asset Management for the Executive (Caution: Don't Read this on an Airplane)" and;
"Electrical Motor Diagnostics: 2nd Edition"
 
Posts: 846 | Location: Connecticut, Michigan and Illinois | Registered: 12 April 2005Reply With QuoteEdit or Delete MessageReport This Post
Terrence O'Hanlon
Posted Hide Post
Check out http://www.rossmackay.com/

Ross is super knowledgable and would be a good resource for you.

Sign up for his email newsletter is you have an ongoing interest in pumps.

Terry O
 
Posts: 776 | Location: Southwest Florida Gulf | Registered: 03 April 2004Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 


Copyright © 2004-2008 NetexpressUSA Inc. All rights reserved.