Posts About Motor Testing - Forum Topic Powered by MaintenanceForums.com

Please do not hesitate to post a question, no matter how basic you might feel it is. If we all had the basics completely covered, we would all have better reliability.

If you like MaintenanceForums.com wait till you try Maintenance.org

Join or Manage Your Profile

Posting Boards

Machinery Condition Monitoring and Predictive Maintenance

Posts About Motor Testing

Page 1 2 3 4 5 6

New

Find

Notify

Tools

Personal Zone	»
Member Directory
Posting Boards	»
Reliability Chat Rooms	»

Topic	Topic Starter	Replies	Views	Last Post
PPF sidebands around 1X	monitor	11	1327	by arie mol
Reliability test for aluminium wired AC motor	Felix	3	1397	by surferslate
Types of insulated bearings?	Randle	6	883	by RRS_Dave
DC motor Rotation	mustangman	5	1889	by joejack
Motor Testing Info	process industry info	0	522
How damaging is 6xLF to a motor?	David_G	12	918	by David_G
Motor consumption	PatriceBDP	14	1074	by electricpete
hungry machine eating tilting paths	arie mol	11	1339	by arie mol
Motor rotor bar measurement hardware	John1947	1	586	by Testtech
Megger of 10.5kV Generator	Calvin	4	1201	by Wally gator
Study material ?	CMT Tech	1	562	by electricpete
Rotor anomalies ?	CMT Tech	1	564	by Testtech
VFD Motor Speeds	Rockin' Rod	2	573	by MotorDoc
Cost effective motor CBM on a big Paper Mill	STORAnders	12	1456	by OLI
Specifications for Current transformers for MCSA	Vedika	1	545	by OLI
What should the resistance value be ?	CMT Tech	1	583	by arie mol
strange behavior on a JEUMONT SNIJDER electric Motor	monitor	4	1030	by monitor
Surge arrester in 6.6 KV Motor feeder	Debul	2	1401	by Debul
Rotor problems and fluting	Kerbouchar	4	913	by Michel
synchronous machine torsional resonance	arie mol	8	1248	by William_C._Foiles
swirl frequency - sidebands around 5*LF	electricpete	11	1416	by shawnV
Motor Current/Vibration Data for healthy and faulty Induction Motor	bunti	2	1455	by Ron Brook
Book on MCSA	Vedika	2	672	by Vedika
Tool for MCA	jonoajah	5	773	by jonoajah
Shorting slip rings on wound rotor motor	jim2f	3	1832	by jank
Low Voltage Testing for dirty windings ...Is it possible?	RRS_Dave	4	780	by jim2f
Setup for MCSA in SKF CMVA 60	Gurusamy	5	1480	by Gary H.
Dry ice Blasting	John_the_engineer	4	653	by Robert U.
Motor trip due to high viabration	aliali	5	1479	by Gurusamy
Motor Tip	Terrence O'Hanlon	19	1490	by MotorDoc
Best Method to Read Shaft Voltage	BHelton	3	2175	by Mikko
DC Absorption Test	Aditya	5	2345	by animatrix
found stator bore damage... from rub?	electricpete	8	2125	by electricpete
winding defect	Valve	2	712	by Kerbouchar
Axial Vibration in Motor	Prabhu	5	1415	by AKHTAR
1500 KW Synchronous Motor Failure	Aditya	4	893	by Aditya
High magnitude 360 HZ in a DC motor	David_G	24	1683	by electricpete
Winding current theory question	Wally gator	2	783	by Gary H.
Learn from my ignorance... weird repeated motor death problem.	Metalworker Mike	0	634
Different Method for Motor Health Testing	Mr.IR	2	687	by Mr.IR
pole pass freq. at starting	arie mol	3	763	by jank
ALL ATP USERS	Mr.IR	15	1581	by Mr.IR
Are PdM Instruments for motor testing too expensive for the average facility?	DanS	5	998	by jkays
multiple pole pass sidebands around LF	electricpete	1	566	by Aditya
megger test results	Pennichuck	16	3238	by JOA1
Motor Current Signature Analysis	MRTA	14	1663	by electricpete
Comparing results of motor on-line diagnostic	VictorP	8	812	by VictorP
Vibration Analysis vs. Motor current signature anlysi	Jim Zuidema	16	5149	by Daniel Bernardo
C.G and Magnetic Centre in Motor	Prabhu	1	577	by RRS_Dave
Power thiefs again	S	7	725	by S